Qtech-data-systems Tait TM8000 Radio Manual de usuario descargar pdf (Pagina 38)

38 Troubleshooting

Reinstalling the microphone

Caution: The microphone grommet must be installed

whenever the microphone is plugged into the

microphone socket.

1 Plug the microphone into the microphone socket.

2 Slide the microphone grommet along the microphone cord

and push two adjacent corners of the grommet into the

microphone socket cavity.

3 Squeeze the grommet and push the remaining corners

into position.

4 Check that the grommet is seated correctly in the cavity.

Removing the radio from the vehicle

1 Switch off the radio.

2 Unscrew the four thumb screws that secure the radio to

the U-bracket .

3 Carefully lift the radio clear of the U-bracket.

4 Disconnect the antenna and power cable from the

rear of the radio.

microphone

grommet

control

head

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Sin comentarios

Qtech-data-systems Tait TM8000 Radio Manual de usuario Pagina 38